Router nesting

Router nesting

More Information
1. Use any router bit with the pointed end to center your router on the Plexiglass router base. 2. Attach the vacuum adaptor and hose. 3. Position the router so that you can operate it without interference. 4. Once you reach the desired position, mark the router base plate location on the Plexiglass router base with a marker. 5. Remove the router base plate from your router and use it as a template to mark holes on the Plexiglass base in the position you marked. 6. Drill holes into the Plexiglass base. Use a drill press with the required size of bit to fit your base plate screws. 7. Attach your base plate back to your router. 8. Remove the “knockout” on the Plexiglass base and affix your router with flat head bolts and washers. 9. Place the Plexiglass router base back into your router cart and tighten it down using M6 Wing nuts. Do not overtighten or you can crack your Plexiglass base!

tutorials Gallery